3M WLX-1 MPN32161

3M™ wire pulling lubricant wax WLX is a thick, consistent lubricant that does not liquefy or separate with hot aging. It scoops and applies easily to wire and cable without runs or drips in hot temperatures and it will not evaporate too soon after pulls. The lubricant's low co-efficient of friction lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because wire pulling lubricant wax can be immersed in water for 30 min with minimal weight loss, it is also the preferred choice for wet weather applications.

Scotch® Wire Pulling Lubricant, Series: WLX, Pail Container, 1 gal Container, 35 lb Net Weight, Wax Base, Composition: Water, Paraffin Wax, Polyethylene Glycol, Glycols, Polypropylene, Sodium Polyacrylate, Gel Form, Gray, Odorless Odor/Scent, 10 to 194 deg F, 1.01 Specific Gravity, 6.5 to 8.5 pH, 65000 to 100000 cPs Viscosity

• Line Drawing https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_5807f9cb8c45f7ff5466c6c90204633bc984d417fac9cfba38e1f87c68337464.pdf
• SDS https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_10f3ab2feb9d7bf6e7aeaa18c98e60c777e77515da68d6cc0164e9419a668627.pdf
• Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_de4efe9a97a35abff1e20df7c32f8394821402a5042922afc7f68c3e13e2097c.pdf